Quote

Active drawing

Custom & Non-Standard DIN 94 / ISO 1234 Split Cotter Pins

Split Cotter Pins

Need custom DIN 94 cotter pins? Use the DIN 94 / ISO 1234 split-pin geometry as a starting template, then define nominal wire diameter, overall length, short and long leg lengths, eye or loop inside diameter, leg spacing, end form, material, surface treatment, tolerances and inspection. The approved drawing controls the finished non-standard split pin.

Standards
  • DIN 94
Back to Split pinsCompare DIN 94 equivalents and replacement →

Create Your DIN 94 Drawing Online

Use this DIN 94 drawing generator to configure dimensions, review the technical drawing and export a custom drawing for manufacturing. Whether the specification is written as DIN 94 or DIN94, this online drawing tool covers the same Split Cotter Pins standard reference.

Customize DIN 94 Split Cotter Pins

DIN 94 is a legacy German reference and ISO 1234 is the current metric comparison path. Treat the standard as a starting geometry, not a fixed catalog limit: select the drilled-hole fit and change wire diameter, length, eye, leg proportions, material, finish or tolerances as required. Keep metric DIN/ISO split pins separate from inch ASME cotter pins; the approved drawing controls the final part.

DIN 94

Split Cotter Pins

Technical Data Sheet

ETERNAL FASTENER
Wuxi, Jiangsu, China
Email: [email protected]
Web: www.fasteneref.com
WhatsApp: +8615951571207
DIN 94
DIN 94 Split Cotter Pins
Product code
Product specification
Φ0.6x6
Product standard
DIN 94
Material / grade
Steel 45
Unit
mm
Mechanical properties
45H
DIN 94 technical drawing
Dimension
Parameter (mm)
Dimension
Parameter (mm)
d
0.4~0.5
L
5.5~6.5
b
2
a
0.8~1.6
c
0.9~1

max = maximum; min = minimum

Material
Material type
Steel
Grade
45
Thread
Tolerance
Standard
Mechanical properties
Property class
45H
Standard
Tolerance
Product grade
Standard
Surface defects
Surface Treatment
Inspection & packaging
Ref. wt / 1000 pcs (kg)
Document No.: EF-DIN-94Revision: v1Issue date: 2026-09-24Page: 1 / 2

Technical Data Sheet

Dimensions & size table

Unit: mm

Dimensiond/maxd/mina/maxa/minc/minc/max
Φ0.60.50.41.60.80.91
Φ0.80.70.61.60.81.21.4
Φ10.90.81.60.81.61.8
Φ1.210.92.51.251.72
Φ1.61.41.32.51.252.42.8
Φ21.81.72.51.253.23.6
Φ2.52.32.12.51.2544.6
Φ3.22.92.73.21.65.15.8
Φ43.73.5426.57.4
Φ54.64.44289.2
Φ6.35.95.74210.311.8
Φ87.57.34213.115
Φ109.59.36.33.216.619
Φ1312.412.16.33.221.724.8
Φ1615.415.16.33.22730.8
Φ2019.3196.33.233.838.6
Document No.: EF-DIN-94Revision: v1Issue date: 2026-09-24Page: 2 / 2

Related catalog products

Catalog fasteners commonly specified with this drawing family. Confirm size, material and property class against your project drawing.

Request a Quote for Custom DIN 94 Cotter Pins

Send the completed drawing with hole fit, wire diameter, overall and leg lengths, eye geometry, material, finish, quantity and inspection requirements for engineering review and quotation.

Request a quote