Active drawing

Custom & Non-Standard DIN 982 Nylon Insert Lock Nuts

Prevailing torque hexagon nuts with non-metallic insert, coarse pitch

Need custom DIN 982 nylon insert lock nuts? Use the DIN 982 high-form drawing as a starting template, then define coarse or fine thread and pitch, nut height, width across flats, bearing face, insert material and position, nut material or property class, finish, lubrication, prevailing-torque targets and inspection. The approved drawing controls the finished non-standard nut.

Standards

DIN 982

Create Your DIN 982 Drawing Online

Use this DIN 982 drawing generator to configure dimensions, review the technical drawing and export a custom drawing for manufacturing. Whether the specification is written as DIN 982 or DIN982, this online drawing tool covers the same Prevailing torque hexagon nuts with non-metallic insert, coarse pitch standard reference.

Customize DIN 982 Nylon Insert Lock Nuts

DIN 982 is the reference template, not a limit on the customer specification. Coarse-pitch versions follow the ISO 7040 comparison path; fine-pitch versions follow ISO 10512. Specify the complete thread, high-form body, insert material and retention, temperature, finish and initial/reuse prevailing torque. Do not replace this high-form template with the lower DIN 985 / ISO 10511 family without approval.

Technical Data Sheet

ETERNAL FASTENER

Wuxi, Jiangsu, China

Email: [email protected]

Web: www.fasteneref.com

WhatsApp: +8615951571207

DIN 982 Prevailing torque hexagon nuts with non-metallic insert, coarse pitch

Product code

Product specification

Product standard

DIN 982

Material / grade

Steel 45

Unit

Mechanical properties

10 5.6 8

Dimension

Parameter (mm)

Dimension

Parameter (mm)

0.8

8.79

6~6.3

4.4

7.78~8

max = maximum; min = minimum

Material

Material type

Steel

Grade

Insert

non-metallic，e.g. nylon

Thread

Tolerance

Standard

DIN 13-12 DIN 13-15

Mechanical properties

Property class

10 5.6 8

Standard

DIN EN ISO 898-2 DIN 267-15

Tolerance

Product grade

D≤M16:A; D＞M16:B

Standard

DIN ISO 4759-1

Surface Treatment

plain; electroplatingDIN 267-9

Surface roughness

DIN 267-2

Surface defects

DIN 267-20

Inspection & packaging

DIN 267-5

Ref. wt / 1000 pcs (kg)

Technical Data Sheet

Dimensions & size table

Unit: mm

Dimension	P	e/min	h/max	h/min	k/min	s/max	s/min
M5	0.8	8.79	6.3	6	4.4	8	7.78
M6	1	11.05	8	7.7	4.9	10	9.78
M7	1	12.12	8.5	8.2	6.14	11	10.73
M8	1\|1.25	14.38	9.5	9.14	6.44	13	12.73
M10	1\|1.25\|1.5	18.9	11.5	11.14	8.04	17	16.73
M12	1.25\|1.5\|1.75	21.1	14	13.64	10.37	19	18.67
M14	1.5\|2	24.49	16	15.3	12.1	22	21.67
M16	1.5\|2	26.75	18	17.3	14.1	24	23.67
M18	1.5\|2\|2.5\|1	29.56	20	19.16	15.1	27	26.16
M20	1.5\|2\|2.5	32.95	22	20.7	16.9	30	29.16
M22	1.5\|2\|2.5	35.03	25	23.7	18.1	32	31
M24	2\|3	39.55	28	26.7	20.2	36	35

Product parameters

Dimension	Parameter (mm)
d
P
e min
h max
h min
k min
s max
s min

Technical conditions

Material	Material type
	Grade
	Insert
Thread	Tolerance
Thread	Standard
Mechanical properties	Property class
Mechanical properties	Standard
Tolerance	Product grade
Tolerance	Standard
Surface Treatment	plain; electroplatingDIN 267-9
Surface roughness
Surface defects
Inspection & packaging
Ref. wt / 1000 pcs (kg)

Notes / Remarks

Document No.

Document No.
Revision
Issue date
Page
Prepared by
Approved by
Product code

Related catalog products

Catalog fasteners commonly specified with this drawing family. Confirm size, material and property class against your project drawing.

DIN 985 / DIN 982

10B21 / 35K / Grade 8 / 10

Nylon Insert Lock Nuts

Nylon insert lock nuts per DIN 985 / DIN 982 in 10B21 / 35K, Grade 8 / 10 grade.

Automotive & New Energy VehiclesRailway & Rolling Stock

Stainless Nylon Insert Lock Nuts (DIN 985 / DIN 982) - A2-70 / A4-80 - SS304 / SS316 with Nylon Insert - hex nut body with visible nylon locking insert; primary product view

DIN 985 / DIN 982 / ISO 10511 / ISO 10512

SS304 / SS316 with Nylon Insert / A2-70 / A4-80

Stainless Nylon Insert Lock Nuts

A2 / A4 stainless nylon insert lock nuts per DIN 985 / DIN 982.

Construction, Bridges & Heavy MachineryMarine & ShipbuildingRailway & Rolling Stock+1

Hex Head Bolts (Partial Thread) (ISO 4014 / DIN 931) - 8.8 / 10.9 / 12.9 - 40Cr / 42CrMo / SCM435 / 4140 - plain shank with a partially threaded end; primary product view

ISO 4014 / DIN 931 / ASTM F3125 / SAE J429

40Cr / 42CrMo / SCM435 / 4140 / 8.8 / 10.9 / 12.9

Hex Head Bolts (Partial Thread)

Partial-thread high-strength hex head bolts per ISO 4014 / DIN 931 in 40Cr / 42CrMo / SCM435, 8.8 / 10.9 / 12.9.

Automotive & New Energy VehiclesRailway & Rolling StockSolar & Wind Renewable Energy

Hex Flange Bolts (DIN 6921 / ISO 4162) - 8.8 / 10.9 / 12.9 - 10B21 / SCM435 / 35CrMo - hex head with integral load-bearing flange; primary product view

DIN 6921 / ISO 4162 / SAE J429

10B21 / SCM435 / 35CrMo / 8.8 / 10.9 / 12.9

Hex Flange Bolts

Hex Flange Bolts per DIN 6921 in 10B21 / SCM435 / 35CrMo, 8.8 / 10.9 / 12.9 grade.

Automotive & New Energy Vehicles

Request a Quote for Custom DIN 982 Lock Nuts

Send the completed drawing with thread and pitch, high-form dimensions, insert details, material, finish, torque target, quantity and inspection requirements for engineering review and quotation.

Request a quote