OEM / ASTM D7957 refGlass Fiber Reinforced Polymer (GFRP) / —
GFRP Composite Bolts
GFRP composite bolts with UV stabilization for non-conductive lightweight joints.
Power Generation & EnergySolar & Wind Renewable Energy
Material and performance series
Special Materials & Engineered Polymers
GFRP · PEEK · PA66 · Aluminum 7075-T6
Composite, polymer and aluminum fasteners where insulation, low mass or chemical resistance matters
- Subcategories
- 6
- Products
- 17
- Industries
- 9
17 matching products
Bolts & Studs
1 matching productsOEM / ASTM D7957 refScrews
3 matching products
ISO 7049 ref / DIN 7981 ref / OEMPEEK / —
PEEK Screws
PEEK screws for high-temperature, chemical-resistant and washdown assemblies.
Aerospace & AviationMedical & Food ProcessingSolar & Wind Renewable Energy
OEM drawing / DIN 84 ref / ISO 7045 ref / ISO 14583 refAluminum 6061 / 7075 / 2024 / Drawing-based
Custom Aluminum Micro Screws
Lightweight custom aluminum micro screws for precision assemblies, electronics, instruments and compact equipment.
Aerospace & AviationMedical & Food ProcessingAutomotive & New Energy Vehicles+1
ISO 7049 ref / DIN 7981 ref / OEMPA66 / —
PA66 Nylon Screws
PA66 nylon screws for lightweight non-metallic equipment assemblies.
Solar & Wind Renewable Energy
Nuts
3 matching products
ISO 4032 ref / DIN 934 ref / OEMPEEK / —
PEEK Hex Nuts
PEEK hex nuts matched to PEEK screw and non-metallic bolting assemblies.
Medical & Food ProcessingSolar & Wind Renewable Energy
ISO 4032 ref / DIN 934 ref / OEMGFRP / PA66-GF / —
GFRP Composite Hex Nuts
GFRP composite hex nuts matched to composite bolt and anchor rod assemblies.
Solar & Wind Renewable Energy
ISO 4032 ref / DIN 934 ref / ASTM D4066 refPA66 / —
PA66 Nylon Hex Nuts
PA66 nylon hex nuts matched to nylon screw assemblies.
Railway & Rolling StockSolar & Wind Renewable Energy
Washers
5 matching products
ISO 7089 ref / DIN 125 ref / ASTM D4894 refPTFE / —
PTFE Flat Washers
PTFE flat washers for chemical-resistant, low-friction and insulating joints.
Medical & Food ProcessingSolar & Wind Renewable Energy
ISO 7089 ref / DIN 125 ref / OEMGFRP / PA66-GF / —
GFRP Composite Flat Washers
UV-stabilized GFRP composite flat washers for composite bolt assemblies.
Solar & Wind Renewable Energy
ISO 7089 ref / DIN 125 ref / ASTM D4066 refPA66 / —
PA66 Nylon Flat Washers
PA66 nylon flat washers for insulating and lightweight non-metallic joints.
Railway & Rolling StockSolar & Wind Renewable Energy
ISO 7089 ref / DIN 125 ref / OEMPEEK / —
PEEK Flat Washers
PEEK flat washers for high-temperature and chemical-resistant non-metallic joints.
Medical & Food ProcessingPetrochemical, Oil & Gas & Pressure Vessels
OEM / ASTM D4066 refPEEK / PPS / PA66 / —
Insulating Shoulder Washers
Insulating shoulder washers for electrical isolation around bolts and studs.
Petrochemical, Oil & Gas & Pressure VesselsPower Generation & Energy
Anchors & Special Fasteners
4 matching products
ISO 15978 / DIN 7337Aluminum Alloy Body / Zinc-Plated Carbon Steel Mandrel / AlA/St Countersunk
Countersunk Blind Rivets
ISO 15978 / DIN 7337 countersunk blind rivets with aluminum bodies and steel mandrels for low-profile installation in a correctly prepared countersunk hole.
Automotive & New Energy VehiclesRailway & Rolling StockAerospace & Aviation
DIN 7337 / Supplier StandardAluminum Alloy Body / Zinc-Plated Carbon Steel Mandrel / AlA/St Large Flange
Large-Flange Blind Rivets
Aluminum/steel large-flange blind rivets that spread head-side load over a wider area on thin sheet, plastic and soft panels.
Automotive & New Energy VehiclesConstruction, Bridges & Heavy MachineryRailway & Rolling Stock
ISO 15983 / DIN 7337Aluminum Alloy Body / Zinc-Plated Carbon Steel Mandrel / AlA/St Closed-End
Closed-End Blind Rivets
ISO 15983 / DIN 7337 closed-end blind rivets with aluminum bodies and zinc-plated steel mandrels for improved resistance to dust and moisture ingress.
Automotive & New Energy VehiclesConstruction, Bridges & Heavy MachineryRailway & Rolling Stock+1
DIN 7337 / ISO 15977Aluminum Alloy Body / Zinc-Plated Carbon Steel Mandrel / AlA/St (Aluminum / Steel)
Open-End Blind Rivets
DIN 7337 / ISO 15977 open-end blind rivets with aluminum bodies and zinc-plated steel mandrels for one-side sheet-metal fastening.
Automotive & New Energy VehiclesConstruction, Bridges & Heavy MachineryRailway & Rolling Stock
