PTFE Flat Washers
| Standard | DIN 125 ref · ISO 7089 ref · ASTM D4894 ref |
|---|---|
| Material | PTFE |
| Strength Grade | — |
| Size Range | M2-M16 |
| Surface Treatment | Natural |
01
Product Description
Product Description & Key Specifications
PTFE flat washers provide a low-friction, chemically resistant and non-metallic bearing surface for light-duty fastened joints. They are used where metal washers may corrode, stick, contaminate the assembly or conduct electricity.
PTFE is selected for strong chemical resistance, very low surface energy and good release behavior. It is used in medical equipment, food processing accessories, chemical equipment, renewable energy electrical accessories and non-stick bearing interfaces. It should not be treated as a high-strength structural washer because PTFE can creep under sustained load.
This washer range covers M2-M16 sizes with ISO 7089 / DIN 125 reference dimensions or OEM drawings. Natural PTFE is standard; RFQs should confirm ID, OD, thickness, operating temperature, chemical media, compression load and any FDA, material or dimensional documentation requirements.
| Product type | PTFE flat washers / low-friction plastic washers |
|---|---|
| Standards | ISO 7089 reference / DIN 125 reference / ASTM D4894 material reference |
| Material | PTFE |
| Strength grade | Polymer washer, not a steel hardness class |
| Size range | M2-M16 |
| Common models | M2, M3, M4, M5, M6, M8, M10, M12, M16 |
| Washer form | Flat washer by standard reference or custom drawing |
| Surface finish | Natural PTFE surface |
| Matched hardware | PEEK screws, PEEK nuts, stainless screws and light-duty equipment fasteners |
| Documentation | CoC, material data sheet, dimensional report and compliance documents on request |
Dimensions and Drawing
02
Manufacturing
Manufacturing & Quality Control
Manufacturing CapabilityQuality Control
Stamping, machining or cutting from PTFE sheet or rodPTFE material verification and batch traceability
DIN / ISO reference sizes or drawing-based dimensionsID, OD, thickness and burr inspection
Natural PTFE washer production for light-duty assembliesSurface cleanliness and deformation checks
Prototype and production lots for chemical or insulating applicationsMaterial data sheet and dimensional report on request
Clean bagging or size-based project packagingCoC and inspection report matched to package labels
03
Selection
Selection Advantages by Application
Chemical and Washdown Equipment
PTFE washers are used where chemical resistance, low friction and non-stick performance are more important than high clamp load.
Industrial equipment fastenersMedical and Food Processing Accessories
Natural PTFE washers can be specified for selected medical, laboratory and food equipment accessories. Confirm regulatory and material grade requirements before ordering.
Medical and pharmaceutical fastenersRenewable Energy Electrical Assemblies
PTFE washers can support non-conductive bearing and isolation needs in light-duty electrical accessories used around solar or renewable equipment.
Renewable energy fasteners04
Assembly
Recommended Matching Products
05
FAQ
Common Questions Before RFQ
What are PTFE flat washers used for?
They are used for chemical resistance, low friction, non-stick behavior and electrical insulation in light-duty joints.
Can PTFE washers replace metal washers?
Only where the joint load is suitable. PTFE is not a structural washer material and may creep under sustained compression.
What is ASTM D4894?
ASTM D4894 is a PTFE material reference. Washer dimensions may follow DIN, ISO or custom drawings.
Are custom PTFE washer sizes available?
Yes. ID, OD and thickness can be produced from drawings when standard M2-M16 sizes are not suitable.
What RFQ details are needed?
Send washer size, ID, OD, thickness, material grade, quantity, temperature, chemical exposure and documentation requirements.
Need PTFE flat washers for chemical or low-friction joints?
Send washer dimensions, material grade, quantity, chemical media, temperature and certificate needs. We can quote M2-M16 PTFE washers to DIN / ISO references or custom drawings.
Request a Quote
Get engineering support and pricing for this product — our team responds within 24 hours.